Coating FAQPosition ： Guangzhou Land Rover Transportation Facilities Co., Ltd. 快乐炸金花 > News > Frequently Asked Questions > Frequently Asked Questions about Coatings
Pavement marking paint with reflective rain glass beads
厂家了解，目前已有相关单位针对雨夜玻璃珠专门成立的科研小组，攻克雨夜路面标线涂料内混型专用雨夜玻璃珠，解决了雨夜反光标线反光作用持续性问题。 Pavement marking paint manufacturers understand that currently there are relevant scientific research groups specially established for Yuye Glass Beads to overcome the rainy road marking paint inner mixing special rainy glass beads, which solves the problem of the persistence of the reflection effect of the rainy night anti-cursor line.
It can be used internally for rainy night reflective glass beads. It can be used internally in the paint (addition amount ≥30%), or it can be sprinkled on the road marking surface. It solves the current rainy night reflective glass beads on the market. Puzzle. And the use cost is greatly reduced. The golden armor series uses rainy night reflective glass beads, which are made of strange optical structure. The appearance is similar to ordinary reflective glass beads.
内混用雨夜玻璃珠，完整解决了雨夜反光标线持续反光性能问题，按新国标路面标线涂料要求（意见稿）内混玻璃珠含量≥30%比例添加到涂料中， 路面标线涂料 厂家在施工时面撒玻璃珠或雨夜反光珠，既能保障雨夜反光标线初始逆反射系数，也能保障了雨夜反光标线表面雨夜反光珠磨损后持续雨夜反光性能。 Pavement marking paint is mixed with rainy night glass beads, which completely solves the problem of continuous reflective performance of rainy night anti-cursor lines. According to the new national standard pavement marking paint requirements (opinion draft), the content of mixed glass beads ≥30% is added to the paint. Line paint manufacturers spray glass beads or rainy night reflective beads during construction, which can not only guarantee the initial retroreflective coefficient of rainy night cursor line, but also ensure the rainy night reflective performance of rainy night reflective line after the wear of rainy night reflective beads.
料 Road marking paint 400-900-3139 The company's consultation hotline: 400-900-3139
770号汇金广场C座3A01 Land Rover Traffic Marketing Company Address: 3A01, Block C, Huijin Plaza, 770 Baiyun Avenue North, Baiyun District, Guangzhou
1601号-路虎交通 Land Rover Transportation Factory Address: No. 1601 Longjing Road , Longhu Village, Shijing Street, Baiyun District, Guangzhou
- Precautions for the production of two-component marking paint 1
- The main components of hot melt marking paint and its reflection principle
- Detailed introduction of hot melt coating
- Classification of road marking paints 1
- Classification, coating raw materials and function of road marking paint
- Construction technology of hot-melt marking paint
- Construction and precautions of hot melt marking paint and road marking paint
- Characteristics of shock-type hot-melt marking paint
- When the hot-melt marking coating is melted, the temperature should be controlled between 180-200 ° C. After melting, it should be fully stirred and homogenized, and then discharged after holding for 3-5 minutes to reflect the performance of the hot-melt coating.
- Tips for Hot Melt Marking: Analysis of Causes for Cross Section Cracking of Hot Melt Pavement Marking