快乐炸金花

快乐炸金花

Guangzhou Land Rover transportation facilities Co., Ltd

contact number: 400-900-3139

Fax: 020-36595168

Email: 2881854229@qq.com

Address of marketing center: 3a01, block C, Huijin Plaza, 770 Baiyun Avenue North, Baiyun District, Guangzhou

Address of company factory: 1601 Longjiao Road, Longhu village, Shijing street, Baiyun District, Guangzhou

Dimensions and characteristics of rubber speed bumpers - Manufacturers

Click: 155 date: September 10, 2020 Select font size: Small in large
 Dimensions and characteristics of rubber speed bumpers - Manufacturers

Speed bump, as the name implies, is installed on the highway, so that passing vehicles slow down the speed of traffic facilities. Deceleration belt manufacturer Speed bumps are generally set in the road accident prone areas, as well as schools, enterprises and institutions, the entrance of the community and other places. It can reduce traffic accidents and improve traffic safety.

According to the manufacturer, the rubber speed bump is composed of yellow and black rubber deceleration belt units. The rubber deceleration Belt should be formed in one piece, and the outer surface should have stripes to increase the adhesion. Each deceleration belt unit shall be provided with retroreflective material which is easy to identify at night. The surface shall be free of pores, obvious scratch and lack of material, and the color shall be uniform without flash. If connected to the ground by bolts, the bolt holes shall be countersunk. Each unit of deceleration belt shall be connected in a reliable way.

Deceleration belt manufacturer It is introduced that the width and height direction section of deceleration Belt should be approximately trapezoidal or arc-shaped. Its width should be in the range of (300 mm ± 5 mm) ~ (400 mm ± 5 mm), and its height should be in the range of (25 mm ± 2 mm) ~ (70 mm ± 2 mm). The ratio of the height and width of the rubber speed bumps used on highways and urban roads should not be greater than 0.7.

Characteristics of speed bumps

1. Speed bump manufacturers introduced that the speed bump has very strong compression resistance, sunscreen, pressure endurance;

2. The slope has a certain degree of softness, and there is no strong sense of bumping when the vehicle collides. The effect of shock absorption and shock absorption is good. There are special stripes on the end joints to effectively avoid sliding;

3. Black and yellow, especially eye-catching, so that the driver can clearly see the position of the deceleration slope;

4. The special process ensures the color is durable, waterproof, sunscreen and not easy to fade;

5. It is easy to install and maintain.



The hotline of Land Rover transport website: 400-900-3139

Deceleration belt manufacturer Website address: http://hlsabu3.icu/

Address: 3a01, block C, Huijin Plaza, 770 Baiyun Avenue North, Baiyun District, Guangzhou

Land Rover transportation factory address: 1601 Longjiao Road, Longhu village, Shijing street, Baiyun District, Guangzhou


AG真人网 电玩竞技游戏 电玩竞技游戏 真人斗牛app 幸运飞艇计划免费软件 狗万足彩app 皇冠体育app 皇冠体育官网