快乐炸金花

快乐炸金花

Guangzhou Land Rover transportation facilities Co., Ltd

contact number: 400-900-3139

Fax: 020-36595168

Email: 2881854229@qq.com

Address of marketing center: 3a01, block C, Huijin Plaza, 770 Baiyun Avenue North, Baiyun District, Guangzhou

Address of company factory: 1601 Longjiao Road, Longhu village, Shijing street, Baiyun District, Guangzhou

  • 2020-10-26 Land Rover transportation: high quality precast concrete septic tank, Guangdong Land Rover transportation facilities Co., Ltd
    The precast concrete septic tank is green and environmentally friendly. The overall molding technology and unique inner surface design have significantly improved the compressive strength, which is 3-5 times higher than that of FRP, and equivalent to the strength of cast-in-place reinforced concrete septic tank. In addition to being installed under the green belt, it can also be installed under roads and parking spaces
  • 2020-10-26 Land Rover transportation: advantages of hot melt marking paint
    Do not add too much solvent to dilute the normal temperature marking paint, otherwise, the resin share in the coating will be reduced, and the marking line will drop and wear prematurely. The standard dosage is 0.4-0.5kg/m2. If the paint film is too thin, it will lead to the mark falling and premature wear. In the cement pavement construction should use the cement pavement special coating
  • 2020-10-26 What are the advantages of Guangzhou Marking coatings
    Guangzhou marking coating has the following advantages: good fast drying, good wear resistance, good weather resistance, good surface flow parallel, good reflection, good skid resistance, good adhesion, and is better than other marking coatings in various properties. It has beautiful visual effect, good production technology, convenient use, long life and so on. Apply frequently
  • 2020-10-26 Land Rover traffic: can reflective paint be used on asphalt?
    Urban roads are mostly asphalt or cement ground, and the coatings used on this material are generally hot-melt, because the adhesion and wear resistance of this kind of coating are much stronger than that of cold coating materials. Recently, some customers of Land Rover transportation facilities hope to mark with reflective paint on asphalt pavement, in order to
  • 2020-10-26 Land Rover traffic: what are the characteristics of waterborne pavement marking coatings?
    With more and more attention to environmental protection in China, the regulations of VOC emission in coatings are becoming more and more strict, so the application is more and more widely. The water-borne coating is composed of water as dispersion medium, acrylic polymer emulsion as film-forming material, pigment, filler, auxiliary agent, etc. after physical drying, the film is formed. Water based pavement
  • 2020-10-26 Rainwater collection to realize the recycling of water resources in China
    With the rapid development of China's economy and the advancement of urbanization, there are three major problems: drought and water shortage, flood disaster and water environment deterioration. Rainwater collection pool manufacturers Xiaobian said that such problems will bring a series of negative effects to cities in China. So when it rains
  • 2020-10-26 Land Rover transportation: Investigation on the causes of two-component marking paint falling off
    At present, two-component marking coating is widely used in many new and old pavement maintenance, but its film-forming principle is chemical reaction film-forming, and the volatile solvent film-forming of cold paint, hot-melt physical reaction film-forming, two-component marking coating needs to add curing agent in component B, the amount of curing agent needs to be based on the current situation
  • 2020-10-26 Land Rover transportation: Discussion on the performance and advantages of hot melt marking paint
    The hot-melt marking coating uses the thermoplastic of synthetic resin to make it have fast drying performance and make the marking and pavement firmly bonded. It is generally composed of thermoplastic resin, pigments and fillers, reflective materials and other additives. The hot melt coating is powdery at room temperature. There is no solvent volatile component in the components. During the construction process
  • 2020-10-24 Causes of hot melt marking falling off on Cement Pavement
    Guangdong hot melt marking paint manufacturers introduced that the hot-melt marking paint is a kind of facility which is used to control and guide the traffic and disperse the traffic flow on the road surface or other facilities. It will improve the traffic conditions of pedestrians, vehicles, and traffic conditions
  • 2020-10-24 Advantages of two-component bright marking compared with hot-melt marking
    Guangdong two-component marking paint manufacturers introduced that the main feature of two-component high-intensity marking is to achieve high and continuous reflection. The initial reflection value of the two-component high-intensity marking line can reach more than 300 MCD and 150 MCD after two years. The service life is about 5 years
  • 2020-10-23 Land Rover transportation: precautions for foundation pit setting of precast reinforced concrete septic tank
    Prefabricated reinforced concrete septic tank is a kind of septic tank with national standard. The use of prefabricated concrete septic tank simplifies the design work, accelerates the construction progress of the project, ensures the design quality, and makes the final accounts of construction and completion more convenient. But the national standard needs to consider more, all have a
  • 2020-10-23 Land Rover transportation: detailed explanation of the causes of longitudinal stripes in the construction of hot melt marking paint
    The longitudinal stripe is due to the partial scorching of the hot-melt marking coating during the heating process, and foreign matters may also be mixed in. There are also some defects in the coating of longitudinal groove. Poor appearance will directly affect the appearance quality of the marking paint and affect the reflection effect at night. ...
  • 2020-10-23 Land Rover traffic: does water-based reflective paint solve the problem of adhesion?
    The paint that can draw lines has good adhesion effect, which is to prevent the paint film from being taken away when the vehicle or heavy objects are rolled, so there are certain requirements for adhesion. In the application of marking paint, it is also divided into water-based reflective paint and oily paint. But the use of water-based paint is not very extensive, and
  • 2020-10-23 Land Rover traffic: technical requirements of road marking coatings for titanium dioxide
    Road marking paint is applied in the road traffic safety signs, generally including: solvent based coating, heating coating, hot-melt marking coating, two-component coating, water-based coating and so on. In the traffic road construction, the dry time is short and the operation is simple to reduce the traffic interference
  • 2020-10-23 Land Rover transportation: Analysis on the causes of unqualified hot melt marking paint
    Usually seen on the road markings, although looking at it, looking at the road neat, traffic is also comfortable, but some of the markings are not qualified, the following small series to analyze with you under its hot melt marking paint unqualified what kind of reasons. Identify the level of formula design
  • 2020-10-22 Land Rover transportation: two component marking coatings solve many problems due to its excellent performance
    Two component marking paint is developed by two groups of different low viscosity acrylic monomers, named group A and group B. these two groups of coatings are complementary and indispensable. Before the construction of reflective marking paint on rainy night, the catalyst should be mixed into group B and mixed evenly
  • 2020-10-22 Land Rover transportation: characteristics and advantages of hot melt reflective marking paint
    According to the latest Road law of our country, the paint for road marking must conform to the relevant national standards and should not contain toxic and environmental pollution ingredients. So in the production of road marking paint should be cautious. At present, our country's solvent can be divided into five categories
  • 2020-10-21 How to carry out regular maintenance for signboard manufacturer
    The appearance of traffic signs has established a set of rules for traffic participants, which can guide pedestrians and traffic through guide signs and provide more road information for traffic participants. According to the information of these signs, the traffic can be smoother, so that we can get to the destination faster and save our
  • 2020-10-21 Land Rover transportation: how to choose the right septic tank
    The commercial concrete septic tank with small floor area is selected for septic tank. Whether it is a factory or an enterprise, the use of septic tanks need to consider the issue of land occupation, so as to achieve the saving of land resources. The commercial concrete septic tank makes the rhythm of products more compact. Commercial concrete septic tank is the selection of water treatment effect is good, clean water for
  • 2020-10-21 Land Rover transportation: the suitable temperature for hot melt marking paint drying is 23 degrees
    Hot melt marking coating is a kind of road marking material, which is made of thermoplastic petroleum resin as base material, pigments, fillers and additives as auxiliary materials. More and more technology has been developed to help manufacturers. Some manufacturers are more conservative and unwilling to try new methods with
3992 records 1 / 200 pages next page   one    2     3     4     5  Next 5 pages last page
AG真人网 电玩竞技游戏 电玩竞技游戏 真人斗牛app 幸运飞艇计划免费软件 狗万足彩app 皇冠体育app 皇冠体育官网