简介】 [Introduction to Normal Temperature Marking Coating ]
是环保型产品(不含甲苯、二甲苯)由改性丙烯酸树脂、颜填料、助剂等材料组成， Normal temperature marking paint is an environmentally friendly product (excluding toluene and xylene). It is composed of modified acrylic resin, pigments, fillers, additives and other materials.
一种普及型 常温型标线涂料 。 It is a popular normal temperature type marking paint . Due to its low construction cost per unit area, fast construction speed, easy operation and adaptability
点，被广泛应用于城市道路、国省道，机场、码头、停车场、地下车库、小区、路沿侧石， It is widely used in urban roads, national and provincial highways, airports, docks, parking lots, underground garages, residential areas, and roadside stones.
用于旧线复线。 It is especially suitable for old and double lines.
色彩丰富 ：白、黄、红、蓝、绿。 1. Rich colors : white, yellow, red, blue, and green.
快干耐磨 ：干燥速度快，施工后10分钟即可通车，施工工艺合理，可保持六个月以上。 2. Quick-drying and wear-resistant : The drying speed is fast, and it can be opened to traffic in 10 minutes after construction. The construction process is reasonable and can be maintained for more than six months.
附着力强 ：在工作面干燥、干净、保证漆膜厚度的前提下喷涂，无剥落现象。 3. Strong adhesion : spray on the premise that the working surface is dry, clean, and the thickness of the paint film is guaranteed, without peeling.
鲜明美观 ：色彩鲜艳，符合行业标准。 4. Bright and beautiful : colorful, in line with industry standards. No yellowing, discoloration, cracking, high brightness factor and strong visibility.
施工方便 ：对施工机械无特殊要求，喷涂、手工刷涂均可。 5.Convenient construction : no special requirements for construction machinery, spraying, manual brushing are all available.
夜间反光 ：保证一定的漆膜厚度，配以面撒玻璃微珠，在夜间具有较强反光效果。 6. Reflect at night : ensure a certain paint film thickness, with glass beads sprinkled on the surface, has a strong reflective effect at night.】 [Application of Normal Temperature Marking Coating ]
广泛应用于城市道路、国省道，机场、码头、停车场、地下车库、小区、路沿侧 Normal temperature marking paint is widely used in urban roads, national and provincial highways, airports, docks, parking lots, underground garages, residential quarters, roadsides
适用于旧线复线。 Stone, suitable for old line and double line.
1. The working surface is clean and dry during construction. It is recommended to construct at a temperature above 0 ° C (please increase the temperature of the material appropriately).
2. Stir well before discharging.
3. The treatment of the base oil should be sufficient. After the base oil is completely dry, apply the marking line.
4. For newly completed cement pavement, try to postpone the construction for three months or carry out the primer treatment twice. Otherwise, the reticle may easily fall off.
5. Construction on roads with a lot of traffic. After coating the primer, please set up isolation measures to prevent the wheels from rolling, taking away the primer and leaving dust.
Otherwise, part of the marking lines may easily fall off.